The tip of the T-Shank Type Wood Cutting Jigsaw Blade uses a two-way tempering technique to enhance tip toughness and hardness. The laser beam welding ensures the long life of the saw teeth. Advanced production technology and heat treatment technology ensure the stable and reliable high quality of the products.
Product title: T101AO Ground and taper guound teeth
Ground and taper ground teeth: Teeth ground ,taper ground set
Blade with taper ground spine for fine and clean cuts in wood and plastic
HCS: Carbon steel for use with softer materials such as softwood,wood fibreboards and soft plastics
It is suitable for softwood，plywood,laminated boards(1.5-15mm), especially for curved cuts.
1. If the T-Shank Type Wood Cutting Jigsaw Blade is not used immediately, it should be laid flat or suspended by the inner hole. The other saw blades should not be stacked with other objects or feet, and should be protected against moisture and rust.
2. When the saw blade is no longer sharp and the cutting surface is rough, it must be repaired in time. When grinding, you cannot change the original angle and destroy the dynamic balance.
3. The inner diameter correction of the saw blade, the positioning hole processing, etc. must be carried out by the factory. If the processing is poor, it will affect the use of the product and may be dangerous. In principle, the reaming should not exceed the original aperture of 20mm, so as not to affect the balance of stress.