Categories
Contact Us

Yueqing Zhongxin Tools Co.,Ltd
ADD: Qingjiang Town, Yueqing City, Zhejiang Province, China
Mob. :+86 15088957279
TEL: +86 577 6226 2122
FAX: +86 577 6226 0566
QQ: 349551524
WeChat ID: yqzxgjkf1
E-Mail: yueqingzhongxintools@aliyun.com
http://www.zhongxintools.com/

MSN

Half-bore Type Jig Saw Blade

HSS Jig Saw Blade for Thick Construction Timber or Wood Cutting

HSS Jig Saw Blade for Thick Construction Timber or Wood Cutting

Product title: HSS Jig Saw Blade for Thick Construction Timber or Wood Cutting
Ground and taper ground teeth: Teeth ground ,taper ground set
Blade with taper ground spine for fine and clean cuts in wood and plastic...Chat Now

06-8-w-1.jpg06-8-x.jpg

Specifications:

Tooth distance=1.4mm·20tpi

Work length=50mm·2"

Total length=76mm·3"

Product title: HSS Jig Saw Blade for Thick Construction Timber or Wood Cutting

Ground and taper ground teeth: Teeth ground ,taper ground set

Blade with taper ground spine for fine and clean cuts in wood and plastic

HCS: Carbon steel for use with softer materials such as softwood,wood fibreboards and soft plastics

Feature:

The hard tempering belt back gives it a long life;

The 12-degree rake tip of the rake enhances the protection of the serration;

The precise splitting setting makes it more efficient to cut.

Particularly fine,clean,tear-free cuts on both sides in wood.

Advantage:

The curve is easy to cut and the saw surface is smooth and smooth.

HSS Jig Saw Blade for Thick Construction Timber or Wood Cutting has a long life and high efficiency.

This product can be used for high-volume sawing.

It can refine the sawtooth multiple times.

Applicattion

softwood, plywood,laminated boards(1.5-15mm) *especially for curved cuts

Tips:

The new saw blade must be run-in before it is officially used. Saw blades that are not worn or worn out will reduce their service life.

The feed rate during running-in is 20%-30% of the normal feed; the length of time is about 5-10% of the expected life; the belt speed is 20-30% of the normal cut; the saw band gradually transitions from the running-in period. To normal cutting. The increase in feed rate and belt speed should not be too large.